Fit L4-1.5L (2008)
12. Check the clearance between the closed ear portion of the band. If the clearance is not within the standard, close the ear portion of the band tighter.
13. Repeat steps 11 and 12 for the band on the other end of the boot.
Intermediate Shaft Disassembly
Intermediate Shaft Disassembly
Special Tools Required
^
Half shaft base 07NAF-SR30101
^
Oil seal driver 07947-SBOO100
NOTE: A/T model only.
1. Remove the set ring (A), the outer seal (B), and the external snap ring (C).
2. Press the intermediate shaft (A) out of the intermediate shaft bearing (B) using a press and the half shaft base (C). Be careful not to damage the
metal rings (D) on the intermediate shaft during disassembly.