Fit L4-1.5L (2008)
10. Before filling a cartridge, cut a "V" in the end of the nozzle (A) as shown.
11. Put the cartridge in a caulking gun, and run a bead of adhesive (A) around the front corner glass (B) as shown:
-
With the printed dots (C) on the front corner glass as a guide, apply the adhesive to both side portions of the front corner glass.
-
Apply the adhesive within 30 minutes after applying the glass primer. Make a slightly thicker bead at each corner.
12. Set the front corner glass (A) to the front corner trim (B) quickly. Be careful not to touch the front corner glass where adhesive will be spread.
