honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Keyless Entry - Broken Remote Transmitter Case|Page 8603 > < Keyless Entry - Transmitter Programming Information|Page 8598
Page 1
background image

Keyless Entry Transmitter: All Technical Service Bulletins
Keyless Entry - Broken Remote Transmitter Case

Bulletin No.
96-044

Issue Date
SEP. 23, 1996

Model
1995-96
ODYSSEY
EX

Applicable To
ALL

File Under
ELECTRICAL

Broken Remote Transmitter Case

PROBLEM

The remote transmitter case cannot be secured on a ring because the "loop" is broken.

CORRECTIVE ACTION

Replace the remote transmitters with those listed under PARTS INFORMATION, and perform the programming procedure.

NOTE:

Even if the customer has only one broken remote transmitter case, replace both transmitters.

^

This system will accommodate only two remote transmitters.

^

Program both of the remote transmitters before installing either on a key ring.

Programming the Replacement Remote

Transmitter

1.

Open the driver's door.

2.

Push up the driver's master door lock switch to the UNLOCKED position. Hold it there for the rest of this procedure.

NOTE:

Step 3 must be completed within 10 seconds of performing step 2.

3.

Quickly insert the key in the ignition switch and remove it five times; then insert the key a sixth time, and leave it in the ignition switch. All doors
except the driver's door will lock and unlock to indicate that the control unit is in the program mode.

Keyless Entry - Broken Remote Transmitter Case|Page 8603 > < Keyless Entry - Transmitter Programming Information|Page 8598