Odyssey L4-2.2L SOHC (1995)
3.
Place the release button in the handle assembly on the far right side. Slide it to the left until it drops down into position below the edge of the
handle assembly.
4.
While holding the release button in place with your finger, line up the tabs on the new latch cover and snap it into the handle assembly.
PARTS INFORMATION
Latch cover kit:
P/N 77544-SX0-A01, H/C 4742649
WARRANTY CLAIM INFORMATION
In warranty: The normal warranty applies.
Out of warranty: Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Service Manager or your
Zone Office. You must request consideration, and get a decision, before starting work.
Operation number:
841156
Flat rate time:
0.2 hour
Failed part:
P/N 77540-SX0-A01ZA
H/C 4628053
Defect code:
018
Contention code:
B01