Odyssey L4-2.2L SOHC (1995)
Transmission Shift Position Indicator Lamp: Description and Operation
With the ignition switch in ON (II) or START (III) voltage is applied to the A/T gear position indicator. The A/T gear position switch provides a ground
for each position. As an input is grounded, its indicator light comes ON. If you select R, for example, ground will be applied to the input of the A/T gear
position indicator, and the R indicator will come ON.
With the headlight switch in PARK or HEAD, voltage is applied through the RED/BLK wire terminal. This changes the indicator panel illumination
from fixed to controlled by the dash lights dimmer input through the RED wire.
When the Transmission Control Module (TCM) detects an abnormality in the automatic transmission control system, or when you request diagnostic
trouble codes through the service check connector, the TCM will make the D4 indicator light blink.
