Odyssey L4-2.2L SOHC (1995)
Fuel Quick-Connect Fittings: Service Precautions
WARNING: Do not smoke while working on the Fuel System. Keep open flames away from your work area.
The Fuel Tube/Quick-Connect Fittings assembly connects the In-Tank Fuel Pump with the Fuel Feed Pipe. For removing or installing the Fuel
Pump and Fuel Tank, it is necessary to disconnect or connect the Quick-Connect Fittings. Pay attention to following:
-
The Fuel Tube/Quick-Connect Fittings assembly is not heat-resistant; be careful not to damage it during welding or other heat-generating
procedures.
-
The Fuel Tube/Quick-Connect Fittings Assembly is not acid-proof; do not touch it with a shop towel which was used for wiping away Battery
fluid. Replace the Fuel Tube/Quick-Connect Fittings Assembly if it came into contact with Battery fluid or similar.
-
When connecting or disconnecting the Fuel Tube/ Quick-Connect Fittings Assembly, be careful not to bend or twist it excessively. Replace it if
damaged.
A disconnected Quick-Connect fittings can be reconnected, but the retainer on the mating pipe cannot be reused once it has been removed from the
pipe. Replace the retainer when:
-
Replacing the Fuel Pump.
-
Replacing the Fuel Feed Pipe.
-
It has been removed from the Pipe.
-
It is damaged.