Odyssey L4-2.2L SOHC (1995)
A/T Gear Position Signal: Service and Repair
WARNING: Make sure Lifts, Jacks and Safety Stands are placed properly.
1. Raise the front of the car, and support it with Safety Stands.
2. Set the Parking Brake, and block both rear wheels securely.
3. Shift to N position.
4. Remove the A/T Gear Position Switch Connector from the Connector Stay, then disconnect the A/T Gear Position Switch Connector.
5. Place a Jack under the Transmission, and raise the Transmission just enough to take weight off the Mount.
6. Remove the Transmission Mount.
7. Remove the Jack from the Transmission, and lower it.