Odyssey L4-2.2L SOHC (1995)
Ignition Lock: Service and Repair
1. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures. On models
equipped with radio coded theft protection system, refer to Vehicle Damage Warnings for system disarming and arming procedures.
2. Disconnect battery ground cable and battery positive cable, then wait at least three minutes.
3. Remove dashboard lower cover and knee bolster, then remove steering column covers.
4. Disconnect 7-P and 8-P electrical connectors.
5. Remove steering column mounting bolts and nuts, then lower steering column assembly.
6. Center punch each of two shear bolts and drill heads off.
7. Remove shear bolts from switch body. Do not damage switch body when removing shear bolts.
8. Insert key and turn ignition switch to On position, then push lockpin and remove steering lock assembly.
9. Reverse procedure to install.
10. On models equipped with radio coded theft protection system, refer to Vehicle Damage Warnings for system disarming and arming
procedures. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.
