Odyssey L4-2.2L SOHC (1995)
Wiper Motor: Testing and Inspection
Rear Wiper Motor
1. Remove tailgate lower trim panel.
2. Disconnect 4-P connector at wiper motor.
3. Connect battery positive to No. 4 terminal and negative to No. 3 terminal. Motor should run smoothly. If it does not, repair or replace as necessary.
4. Reconnect the 4-P connector to the wiper motor. Connect an analog voltmeter between the No. 1 and No. 2 terminals. Run the motor by turning
the wiper motor switch ON.
5. The voltmeter should indicate 0 V and 4 V alternately.
