Odyssey EX L4-2156cc 2.2L SOHC MFI (F22B6) (1997)
Brake Fluid Reservoir
1. Check whether the brake fluid level in the reservoir is at the MAX (upper) level. If level is low, add fresh brake fluid to the MAX (upper) level.
Bleeding Air From Modulator Unit
2. Before installing the modulator unit on the vehicle, be sure to bleed the air from the suction port in the modulator unit by leaning the modulator
unit to one side slowly (about 45 degrees) as shown.
Installing Modulator Unit
3. Install the modulator unit in the reverse order of removal.
NOTE: Check the letters stamped on the modulator body, and connect the brake lines properly. Tighten the flare nuts.