Odyssey EX L4-2253cc 2.3L SOHC (VTEC) MFI (1998)
Horn Switch: Testing and Inspection
1. Remove the dashboard lower cover and knee bolster.
2. Disconnect the combination switch harness 16P connector from the main wire harness.
3. Check for continuity between the No. 12 terminal of the combination switch harness 16P connector and body ground in each horn switch position.
^
If there is continuity, the horn switch is OK.
^
If there is no continuity, go to step 4.
4. Remove the steering column upper and lower covers.
5. Disconnect the 4P connector from the cable reel.