Odyssey EX L4-2253cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-1514003.png)
2. Check the pull-in coil for continuity between the S and M terminals. The coil is OK if there is continuity.
Armature Inspection and Test
Armature Inspection
1. Inspect the armature for wear or damage due to contact with the permanent magnet. If there is wear or damage, replace the armature.
2. Check commutator surface and diameter.
^
If the surface is dirty or burnt, resurface with emery cloth or a lathe within the following specifications, or recondition with #500 or #600
sandpaper.
