Odyssey EX L4-2253cc 2.3L SOHC (VTEC) MFI (1998)
6. Fit the rollers to the spider with their high shoulders facing outward.
NOTE:
^
Reinstall the rollers in their original positions on the spider by aligning the marks.
^
Hold the driveshaft pointed up to prevent the rollers from falling off.
7. Pack the inboard joint with the joint grease included in the new driveshaft set.
Grease quantity: 120 - 130 g (4.2 - 4.6 oz)
8. Install the inboard joint onto the driveshaft.
NOTE:
^
Reinstall the inboard joint onto the driveshaft by aligning the marks on the inboard joint and the rollers.
^
Hold the driveshaft so the inboard joint points up to prevent it from failing off.