Odyssey EX V6-3.5L (1999)
Driver/Vehicle Information Display: Testing and Inspection
Safety Indicator Input Test
1. Remove the gauge assembly.
2. Disconnect the 14P connector A and 22P connector B from the gauge assembly.
3. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 4.
4. With the connectors still disconnected, make these input tests at the connectors.
-
If the test indicates a problem, find and correct the cause, then recheck the system.
-
If the input test proves OK, go to step 5.