honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Sliding Door - Alarm Beeps|Page 9914 > < Component Locations|Page 9905
Page 1
background image

Door Sensor/Switch (For Alarm): Customer Interest
Sliding Door - Alarm Beeps

99-072

August 17, 1999

Applies To:
1999 Odyssey - EX thru VIN 2HKRL186.XH541818

Sliding Door Beeper Sounds

SYMPTOM
The sliding door alarm beeps when driving on rough roads or going over bumps.

PROBABLE CAUSE
The contacts of the junction switches on the door edge and the B pillar are not perfectly aligned.

CORRECTIVE ACTION
Use the special tool to align the junction switches.

REQUIRED SPECIAL TOOL
Door Alignment Tool:

T/N 07XAG-001010A, H/C 6262851

WARRANTY CLAIM INFORMATION

In warranty: The normal warranty applies.

Failed part:

P/N 35435-S0X-A01 
H/C 5963194

Defect code:

066

Contention code:

B99

Skill level:

Repair Technician

Out of warranty: Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Service Manager or your
Zone Office. You must request consideration, and get a decision, before starting work.

REPAIR PROCEDURE

1.

Verify the customer's complaint by test-driving the vehicle on a rough road. Note what conditions cause the door alarm to go oft.

NOTE: It may be necessary to turn into a steep driveway at an angle, or drive over a tall speed bump at an angle, to cause enough body flex to get
the alarm to sound.

2.

Open one of the sliding doors.

Sliding Door - Alarm Beeps|Page 9914 > < Component Locations|Page 9905