Odyssey EX V6-3.5L (1999)
8. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 9.
9. Make the following input tests at the connector B and the fuse/relay box socket.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 3 of Multiplex Control System Troubleshooting.
