Odyssey EX V6-3.5L (1999)
Front Door Window Glass: Adjustments
Front Door Glass Adjustment
NOTE:
-
Check the weatherstrips and glass run channel for damage or deterioration, and replace them if necessary.
-
Wipe the run channel clean with a shop towel.
-
Lubricate the run channel with Shin-Etsu grease P/N 08798-9013.
1. Place the vehicle on a firm, level surface.
2. Remove these items:
-
Door panel.
-
Pull pocket bracket.
-
Power window control unit bracket, '03-04 models driver's door.
-
Plastic cover.
3. Carefully lower the glass (A) until you can see the glass mounting bolts (B), then loosen them.
4. Push the glass (A) against the center channel (C), then tighten the glass mounting bolts.
5. Check that the glass moves smoothly.
6. Raise the glass fully, and check for gaps. Check that the glass (A) contacts the glass run channel (B) evenly.
