Odyssey EX V6-3.5L (1999)
13.
Reconnect the 6P latch connector. Clip the connector to the door.
14.
Reinstall the plastic inner door cover and the lock knob.
15.
Left door only: Reinstall the door lock control unit. Reconnect the 8P connector.
16.
Use the switch on the instrument panel to close the door. This resynchronizes the control unit. Then test the door operation with the switch, the
door handles, and the remote transmitter. Make sure it opens and latches properly.
17.
Reinstall the inside door panel.
18.
Reinstall the inside door handle.
19.
Reinstall the front and rear upper trim pieces.
20.
Repeat this procedure on the other door.
21.
Center-punch a completion mark above the eleventh character (H) of the engine compartment VIN.
Disclaimer
