Odyssey EX V6-3.5L (1999)
-
If all the input tests prove OK, go to step 10.
10. Remove the door unit, and disconnect its connector.
11. Inspect the connector and socket terminals to be sure they are making good contact
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 12.
12. With the door unit still disconnected, make these input tests at the connector.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 13.
