Odyssey EX V6-3.5L (1999)
Power Door Lock Switch: Testing and Inspection
Door Lock Knob Switch Test
Door Lock Knob Switch Test
Driver's Door:
1. Remove the driver's door panel.
2. Disconnect the 3P connector (A) from the actuator (B).
3. Check for continuity between the No.1 and No.2 terminals in each switch position.
-
There should be continuity with the knob switch in LOCK.
-
There should be no continuity with the knob switch in UNLOCK.
4. Check for continuity between the No.2 and No.3 terminals in each switch position.
-
There should be continuity with the knob switch in UNLOCK.
-
There should be no continuity with the knob switch in LOCK.
5. If the continuity is not as specified, replace the switch.
Passenger's Door (With Security System):
1. Remove the front passenger's door panel.
2. Disconnect the 3P connector (A) from the actuator (B).
