Odyssey EX V6-3.5L (1999)
-
Plug weld the holes in the lower dashboard and damper housing with a MIG welder.
-
Weld the Wheelhouse upper member.
10. Finish the welded area. Use a hammer and dolly to even out the side bulkhead and front side frame flanges for a close fit with the surface of the
front wheelhouse and damper housing.
11. Apply sealer to the mating surface of the lower dashboard and front side frame, etc.
12. Apply the paint. See Paint Repair section.
WARNING:
-
Ventilate when spraying paint. Most paint contains substances that are harmful if inhaled or swallowed. Read the paint label before opening the
paint container.
-
Avoid contact with skin. Wear an approved respirator, gloves, eye protection, and appropriate clothing when painting.
-
Paint is flammable. Store it in a safe place, and keep it away from sparks, flames or cigarettes.
13. Apply the undercoat. Undercoat the front floor, etc., and apply anti-rust agent to the inside of the welding section of the front side frame, lower
dashboard, and upper member, etc.
14. Install in the parts in the reverse order in which they were removed.
