honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Symptom Related Diagnostic Procedures|Page 3095 > < Symptom Related Diagnostic Procedures|Page 3093
Page 2
background image

8. Connect the No.1 terminal of the rear blower motor main relay 6P connector to body ground with a jumper wire.

Does the blower motor run? 

YES-Go to step 9.

NO-Repair open in the wire between the rear blower motor and the rear blower motor main relay.

9. Connect the No.1 terminal of the rear blower motor main relay 6P connector to the No.3 terminal of the rear blower motor high relay 4P connector

with a jumper wire.

Does the blower motor run ?

YES-Go to step 10.

NO-Repair open in the BLK wire between the low, middle, high blower motor relays or poor ground at G582.

10. Turn the ignition switch ON (II).

11. Measure the voltage between the No.6 terminal of the rear blower motor main relay 6P connector and body ground.

Is there battery voltage?

YES-Go to step 12.

NO-Repair open in the wire between the No.3 fuse in the driver's under-dash fuse/relay box and the rear blower motor main relay.

12. Turn the ignition switch OFF.

Symptom Related Diagnostic Procedures|Page 3095 > < Symptom Related Diagnostic Procedures|Page 3093