Odyssey EX V6-3.5L (1999)
17. Clean all oil off the inside face (A) of the crankshaft pulley, and apply lubricant to the pulley bolt (B) and washer (C).
18. Install the crankshaft pulley, and tighten the bolt to 245 Nm (25.0 kgf.m, 181 ft. lbs.). Do not use an impact wrench.
19. Rotate the crankshaft pulley about five or six turns clockwise so the timing belt positions on the pulleys.
20. Turn the crankshaft pulley so its white mark (A) lines up with the pointer (B).
