honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Dual Air Conditioning (Rear A/C)|Page 8407 > < Dual Air Conditioning (Rear A/C)|Page 8405
Page 8
background image

5. Check for continuity between the No.5 terminal of the rear blower resistor 5P connector and the No.2 terminal of the rear blower motor lower

relay 4P socket.
Is there continuity?

YES-Go to step 6.

NO-Repair open in the wire between the rear blower resistor and the rear blower motor low relay.

6. Check for continuity between the No.1 terminal of the rear blower motor low relay 4P socket and body ground.

Is there continuity?

YES-Go to step 7.

NO-Check for an open in the wire between the rear blower motor low relay and body ground. If the wire is OK, check for poor ground at G582.

7. Turn the ignition switch ON (II).

8. Measure the voltage between the No.4 terminal of the rear blower motor low relay 4P socket and body ground.

Is there battery voltage?

YES-Go to step 9.

NO-Repair open in the wire between the No.3 fuse in the driver's under-dash fuse/relay box and the rear blower motor low relay.

9. Turn the ignition switch OFF.

10. Disconnect the rear A/C control dial 10P connector and the rear A/C passenger control panel 10P connector.

Dual Air Conditioning (Rear A/C)|Page 8407 > < Dual Air Conditioning (Rear A/C)|Page 8405