Odyssey EX V6-3.5L (1999)
6. Disconnect the jumper wire.
7. Turn the ignition switch ON (II)
8. Measure the voltage between the No.4 terminal of the compressor clutch relay 4P socket and body ground.
Is there battery voltage?
YES - Go to step 9.
NO - Repair open in the wire between the No.3 fuse in the driver's under-dash fuse/relay box and the compressor clutch relay.
9. Turn the ignition switch OFF.
10. Reinstall the compressor clutch relay.
11. Make sure the A/C switch is OFF
12. Turn the ignition switch ON (II).
13. '99-00 and '02-03 models: Using the Backprobe Set, measure the voltage between the No.17 terminal of PCM connector A (32P) and body ground
with the PCM connectors connected '01 model. Using the Backprobe Set, measure the voltage between the No.12 terminal of PCM connector E
(31P) and body ground with the PCM connector connected.
Is there battery voltage?
YES - Go to step 14.
