honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Condenser Fan High Speed Circuit Troubleshooting|Page 8574 > < Condenser Fan High Speed Circuit Troubleshooting|Page 8572
Page 2
background image

7. Measure the voltage between the No.4 terminal of the condenser fan relay 4P socket and body ground.

Is there battery voltage?

YES - Go to step 8.

NO - Repair open in the wire between the No.3 fuse in the driver's under-dash fuse/relay box and the condenser fan relay.

8. Reinstall the condenser fan relay.
9. Remove A/C diode A from the passenger's under-dash fuse/relay box.

10. Check for current flow in both directions between the No.1 and No.2 terminals of A/C diode A.

Is there current flow in only one direction?

YES - Go to step 11.

NO - Replace A/C diode A.

11. Turn the ignition switch ON (II).

12. Measure the voltage between the No.2 terminal of A/C diode A 2P socket and body ground.

Is there battery voltage?

YES - Repair open in the wire between A/C diode A and the A/C pressure switch.

NO - Repair open in the wire between the condenser fan relay and A/C diode A.

Condenser Fan High Speed Circuit Troubleshooting|Page 8574 > < Condenser Fan High Speed Circuit Troubleshooting|Page 8572