honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Climate Control Panel Troubleshooting (With Navigation System)|Page 8618 > < Climate Control Panel Troubleshooting (With Navigation System)|Page 8616
Page 1
background image

Control Assembly: Testing and Inspection
Climate Control Power and Ground Circuits Troubleshooting

Climate Control Power and Ground Circuits Troubleshooting

1. Check the No.3 (7.5 A) fuse in the driver's under dash fuse/relay box, and the No.13 (7.5 A) fuse in the passenger's under-dash fuse/relay box.

Are the fuses OK?

YES - Without Navigation System: Go to step 2.
With Navigation System: Go to step 8.

NO - Replace the fuse(s), and recheck.

2. Disconnect climate control unit connector A (8P).
3. Turn the ignition switch ON (II).

4. Measure the voltage between the No.1 terminal of climate control unit connector A (8P) and body ground.

Is there battery voltage?

YES - Go to step 5.

NO - Repair open in the wire between the No.3 fuse in the driver's under-dash fuse/relay box and the climate control unit.

5. Turn the ignition switch OFF.

6. Measure the voltage between the No.2 terminal of climate control unit connector A (8P) and body ground.

Is there battery voltage?

YES - Go to step 7.

NO - Repair open in the wire between the No.13 fuse in the passenger's under-dash fuse/relay box and the climate control unit.

Climate Control Panel Troubleshooting (With Navigation System)|Page 8618 > < Climate Control Panel Troubleshooting (With Navigation System)|Page 8616