honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Symptom Related Diagnostic Procedures|Page 8726 > < Symptom Related Diagnostic Procedures|Page 8724
Page 5
background image

8. Measure the voltage between the No.5 terminal of the rear blower motor low relay 5P socket and body ground.

IS there battery voltage?

YES - Go to step 9.

NO-Repair open in the wire between the No.3 fuse in the driver's under-dash fuse/relay box and the rear blower motor low relay.

9. Turn the ignition switch OFF.

10  Disconnect the rear heater-A/C main switch 10P connector and the rear heater-A/C passenger's control panel 10P connector.

11. Check for continuity between the No.3 terminal of the rear blower motor low relay 5P socket and the No.6 terminal of the rear heater-A/C main

switch 10P connector; and between the No.3 terminal of the rear blower motor low relay 5P socket and the No.2 terminal of the rear heater-A/C
passengers control panel 10P connector.

Is there continuity?

YES-Test the rear heater-A/C main switch and the rear heater-A/C passenger's control panel. Replace the switch as needed.

NO-Repair open in the wire between the rear blower motor low relay and the rear heater-A/C main switch, or between the rear blower motor low

Symptom Related Diagnostic Procedures|Page 8726 > < Symptom Related Diagnostic Procedures|Page 8724