honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Symptom Related Diagnostic Procedures|Page 8735 > < Symptom Related Diagnostic Procedures|Page 8733
Page 14
background image

13. Measure the voltage between the No.5 terminal of the rear mode control motor relay 5P socket and body ground.

Is there battery voltage?

YES-Go to step 14.

NO-Repair open in the wire between the No.3 fuse in the driver's under-dash fuse/relay box and the rear mode control motor relay.

14. Turn the ignition switch OFF.

15. Check for continuity between the No.3 and No.4 terminals of the rear mode control motor 7P connector and body ground individually.

Is there continuity?

YES-Repair short to body ground in the wire(s) between the rear mode control motor and the rear mode control motor relay.

NO-Go to step 16.

16. Check for continuity between the following terminals of the rear mode control motor 7P connector and the rear mode control motor relay 5P

socket.
7P

5P 

No.3

No.2 

No.4

No.4

Symptom Related Diagnostic Procedures|Page 8735 > < Symptom Related Diagnostic Procedures|Page 8733