Odyssey EX V6-3.5L (1999)
Dimmer Switch: Testing and Inspection
Controller Input Test
Control Unit Input Test
1. Before testing the dash lights brightness control functions, troubleshoot the multiplex control system.
Driver's Multiplex Control Unit:
2. Remove the driver's multiplex control unit from the driver's under-dash fuse/relay box.
3. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals OK, go to step 4.
4. With the control unit still disconnected, make these input tests at the connector and fuse/relay box socket.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK go to step 5.
