honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Instruments - Fuel Gauge Inaccurate|Page 11697 > < Instruments - Fuel Gauge Inaccurate
Page 2
background image

Out of warranty: 
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Service Manager or your Zone Office. You
must request consideration, and get a decision, before starting work.

REPAIR PROCEDURE

1.

Remove the second row seats.

2.

Pull back enough of the rear carpet to expose the access panel on the floor.

3.

Remove the access panel.

4.

Make sure the ignition switch is off, then disconnect the 5P connector from the top of the fuel pump assembly.

5.

Remove the fuel fill cap.

6.

** Relieve the fuel pressure (see page 11-208 of the 1999-02 Odyssey Service Manual).

NOTE: 

Whenever you relieve fuel pressure, replace the two sealing washers for the fuel pulsation damper.

7.

Disconnect the two fuel lines (quick-disconnect fittings) from the fuel pump assembly: Hold the connector side of the fitting, squeeze the tabs on
the retainer, and pull the connector off the fuel line. **

Instruments - Fuel Gauge Inaccurate|Page 11697 > < Instruments - Fuel Gauge Inaccurate