honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Panel Illumination Control Module > < Recall - Multiplex Control Unit Replacement|Page 11773
Page 4
background image

6.

Pry away the four tabs, then use a flat-tip screwdriver to remove the multiplex control unit from the fuse/relay box.

7.

Install the new multiplex control unit.

8.

Reinstall the fuse/relay box in the vehicle. Reconnect the electrical connectors.

9.

Install all removed parts.

10.

Reconnect the battery.

11.

Enter the anti-theft code(s). Enter the customer's radio station presets. Set the clock.

12.

With Navigation System: Allow the navigation system to reinitialize. Refer to service bulletin 99-070, 2000-01 Odyssey: PDI of the Navigation
System, filed under PDI.

13.

Center-punch a completion mark above the sixth character (1) of the engine compartment VIN.

Disclaimer

Panel Illumination Control Module > < Recall - Multiplex Control Unit Replacement|Page 11773