Odyssey EX V6-3.5L (1999)
^
The door must be closed when doing voltage checks.
62.
Backprobe terminal No. 6 (GRN/RED) on the 6P closer motor-latch position switch connector. Then, while you monitor voltage to ground, have
an assistant test-drive the vehicle under the same conditions as in step 1.
Is there ever more than 1 V?
YES - Go to step 63.
NO Go to step 65.
63.
Backprobe terminal No. 5 (BLK) on the closer motor-latch position switch connector. Then, while you monitor voltage to ground, have an
assistant test-drive the vehicle under the same conditions as instep 1.
Is there ever more than 1 V?
YES - Go to step 64.
NO - Replace the sliding door latch assembly for the door you're working on (see pages 20-16 and 20-17 of the service manual). Then go to step
72.
