honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

All Technical Service Bulletins for Door Switch: > < Sliding Door - Alarm Beeps on Rough Roads|Page 12328
Page 4
background image

23.

Put a star washer between the ground terminal and the body. Reinstall the ground bolt, and torque the ground bolt to 9 Nm (7 lb-ft).

24.

At the right B-pillar, locate and remove the ground bolt for G581.

25.

Repeat steps 21 thru 23.

26.

Reinstall the left and right B-pillar trim pieces.

27.

Reconnect the negative cable to the battery.

28.

Reset the clock, enter the anti-theft code(s), and enter the radio station presets.

29.

Verify the repair by driving the vehicle under the same conditions as in step 1.

Disclaimer

All Technical Service Bulletins for Door Switch: > < Sliding Door - Alarm Beeps on Rough Roads|Page 12328