Odyssey EX V6-3.5L (1999)
1. Remove the driver's door panel, and disconnect the connectors from the door unit.
2. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 3.
3. Make the following input tests at connector A.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 4.
Driver's Unit:
4. Remove the driver's unit from the driver's under-dash fuse/relay box, and disconnect its connectors.
5. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 6.