Odyssey EX V6-3.5L (1999)
Each schematic represents one circuit. A circuit's wires and components are arranged to show current flow, from power at the top of the diagram, to
ground, at the bottom.
Shared Circuits
Other circuits may share power or ground terminals or wiring with the circuit shown. A wire that connects one circuit to another, for example, is cut short
and has an arrowhead at the end of it pointing in the direction of current flow. Next to the arrowhead is the name of the circuit or component which
shares that wiring. To quickly check shared wiring, check the operation of a component it serves. If that component works, you know the shared wiring is
OK.
Connectors
All in-line and junction connectors are numbered (C725, C416, etc.). Component connectors are not numbered but are identified either by the name of
the component if the component only has one connector, or by a capital letter (A, B, C, etc.) if the component has more than one connector. Below most
