Odyssey EX V6-3.5L (1999)
5. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 6.
6. Make the following input tests at the connector B and fuse/relay box socket.
-
If any test indicate a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 7.
Passenger's Unit:
7. Remove the passenger's unit from the passenger's under-dash fuse/relay box, and disconnect its connector.
8. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 9.