Odyssey EX V6-3.5L (1999)
5. Reconnect the driver's multiplex control unit to the fuse/relay box, turn the ignition switch ON (II), and perform the following input tests at the
appropriate connectors on the back of the fuse/relay box.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 6.
Passenger's Multiplex Control Unit:
6. Remove the passenger's multiplex control unit from the passenger's under-dash fuse/relay box, and disconnect its connectors.
7. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 8.