Odyssey EX V6-3.5L (1999)
8. With the passenger's multiplex control unit still disconnected, make these input tests at the connector and fuse/relay box socket.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input test prove OK, go to step 9.
9. Reconnect the passenger's multiplex control unit to the fuse/relay box, turn the ignition switch ON (II), and perform the following input tests at the
appropriate connectors on the back of the fuse/relay box.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 10 (99-'02 models), or go to step 15 ('03 model).
Door Multiplex Control Unit:
10. Remove the door multiplex control unit from the driver's door, and disconnect its connectors.
