Odyssey EX V6-3.5L (1999)
2. On the '99-03 models driver's seat and '03 model passenger's seat, disconnect and detach the seat belt switch connector (A). Detach the wire
harness clip (B), and release the wire tie (C).
3. Remove the center anchor bolt (D), and remove the seat belt buckle (E).
4. On the '99-03 models driver's seat and '03 model passenger's seat, remove the seat belt switch harness(A):
-
Without manual seat: Adjust the seat cushion to its maximum height, and remove the harness.
-
With manual seat: Remove the seat cushion mounting bolts (B) from the inner seat track (C), then lift the seat cushion halfway from the inner
seat track, and remove the harness. Take care not to damage the hinge bracket (D).
-
'03 model passenger's seat is symmetrical to the illustration shown.
