Odyssey EX V6-3.5L (1999)
9. Disconnect the right side wire harness 2P connector (A) from the SRS main harness 2P connector (B).
10. Connect the special tool (2 ohms) to the SRS main harness 2P connector.
11. Erase the DTC memory.
12. Read the DTC.
Is DTC 4-5 indicated?
YES - Go to step 13.
NO - Short to ground in the right side wire harness; replace the right side wire harness.
13. Disconnect the battery negative cable, and wait for three minutes.
14. Disconnect the driver's airbag connector (A), front passenger's airbag connector (B) and driver's seat belt tensioner connector (C).
