Odyssey EX V6-3.5L (1999)
15. Disconnect the SRS main harness 18P connector (A) from the SRS unit (B), and disconnect the special tool (2 ohms) from the SRS main harness
2P connector.
16. Check resistance between the No.5 terminal of the SRS main harness 18P connector and body ground. There should be 1 M ohm or more. Then
check resistance between the No.12 terminal of the SRS main harness 18P connector and body ground. There should be 1 M ohm or more.
Is the resistance as specified?
YES - Faulty SRS unit; replace the SRS unit.
NO - Short to ground in SRS main harness; replace the SRS main harness.