Odyssey EX V6-3.5L (1999)
21.
With the sliding door open, and control unit connector A (26P) still unplugged, plug in the junction switch connector, then check for continuity
between terminal No.1 of the junction switch connector and body ground.
Is there continuity?
Yes - Repair the short to ground in the BLU/WHT wire. Plug in the power sliding door control unit connector A (26P). Reinstall the power sliding
door control unit.
No - Go to step 22.
22.
Check for continuity between terminal No. 2 of the junction switch connector and body ground.
Is there continuity?
Yes - Repair the short to ground in the BLU/YEL wire. Plug in the power sliding door control unit connector A (26P). Reinstall the power sliding
door control unit.
No - Check the connections at the appropriate power sliding door control unit. If OK, replace the power sliding door control unit. **