honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

All Technical Service Bulletins for Power Sliding Door Switch: > < Body - Power Sliding Door Won't Close Completely|Page 1093
Page 9
background image

23.

Remove the closer motor-latch assembly (see page 20-16 of the 1999-02 Odyssey Service Manual). Hold the assembly vertically. Push up the
fail-safe lever, then release it. The lever should fall without binding.

Does the fail-safe lever fall without binding? 

Yes - Go to step 24.

** No - Replace the closer motor-latch assembly (see page 20-16 of the 1999-02 Odyssey Service Manual). **

24.

Remove the remote control switch-release motor assembly. Make sure all of the levers and motors move without binding.

Do any of the levers bind?

** Yes - Replace the remote control switch-release motor assembly (see page 20-16 of the 1999-02 Odyssey Service Manual).

No - Replace the closer motor-latch assembly (see page 20-16 of the 1999-02 Odyssey Service Manual). Make sure you install the new cables that
come with the new closer motor-latch assembly. **

25.

Test-drive the vehicle on a rough road, then test the affected sliding door by opening and closing it several times to make sure the door is fixed.

DISCLAIMER

All Technical Service Bulletins for Power Sliding Door Switch: > < Body - Power Sliding Door Won't Close Completely|Page 1093