honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Front Accessory Socket|Page 7168 > < Auxiliary Power Outlet|Front|Page 7165
Page 1
background image

Auxiliary Power Outlet: Service and Repair
Front Accessory Socket

Front Accessory Power Socket Test/Replacement

1. Remove the center pocket.
2. Disconnect the 2P connector.

3. Inspect the connector terminals to be sure they are all making good contact

-

If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.

-

If the terminals look OK, go to step 4

4. Turn the ignition switch to ACC (I).
5. Check for voltage between the No.1 and No.2 terminals.

-

There should be battery voltage.

-

If there is no battery voltage, check for.
-

blown No.8 (7.5 A) fuse in the driver's under-dash fuse/relay box.

-

faulty accessory power socket relay.

-

poor ground (G501, G581).

-

an open in the wire.

-

blown No.9 (20 A) in the passenger's under-dash fuse/relay box.

6. Remove the housing (A) and socket (B). 

Front Accessory Socket|Page 7168 > < Auxiliary Power Outlet|Front|Page 7165