honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Customer Interest for Grounding Point:|99-028 > < Sliding Door - Alarm Beeps on Rough Roads|Page 7288
Page 4
background image

23.

Put a star washer between the ground terminal and the body. Reinstall the ground bolt, and torque the ground bolt to 9 Nm (7 lb-ft).

24.

At the right B-pillar, locate and remove the ground bolt for G581.

25.

Repeat steps 21 thru 23.

26.

Reinstall the left and right B-pillar trim pieces.

27.

Reconnect the negative cable to the battery.

28.

Reset the clock, enter the anti-theft code(s), and enter the radio station presets.

29.

Verify the repair by driving the vehicle under the same conditions as in step 1.

Disclaimer

Customer Interest for Grounding Point:|99-028 > < Sliding Door - Alarm Beeps on Rough Roads|Page 7288