Odyssey EX V6-3.5L (1999)
11. Check the front hub for damage and cracks.
12. Remove the cotter pin (A) from the tie-rod end ball joint, then loosen the nut (B).
13. Remove the tie-rod ball joint from the knuckle using the special tool.
14. Remove the clip (A) from the lower arm ball joint castle nut (B), and remove the nut.
15. Remove the lower ball joint from the knuckle using the special tool.
16. Remove the damper pinch bolts (A) and flange nuts (B) from the damper.
17. Pull the knuckle outward, and remove the driveshaft outboard joint (C) from the knuckle (D) by tapping the driveshaft end (E) with a plastic
hammer, then remove the knuckle.
