Odyssey EX V6-3.5L (1999)
5. Loosen the locknut (A), then remove the rack guide screw (B).
6. Remove the spring (C) and the rack guide (D) from the gearbox.
7. Remove the cylinder lines from the gearbox.
8. Drain the fluid from the cylinder fittings by slowly moving the steering rack back and forth.
9. Remove the end plug (A) from the gearbox housing, then remove the nut (B) from the pinion shaft end.
10. Remove the two flange bolts, the valve body unit (C) and gasket (D) from the gearbox. Check that the valve turns smoothly by turning the pinion
shaft. If any play or roughness is felt, replace the valve body unit with a new part if necessary. Do not try to disassemble the valve body unit.
11. Slide the steering rack all the way to the left.
