Odyssey EX V6-3.5L (1999)
Cross-Member: Technical Service Bulletins
Tools - Front Sub-Frame Removal Adapter
01-021
May 8, 2001
Applies To: 19992001 Odyssey ALL
Odyssey Front Sub-Frame Removal Adapter
The Odyssey Front Sub-Frame Removal Adapter is a required tool. When properly fitted to a transmission jack and the vehicle's front sub-frame, the
adapter provides a convenient way to remove the sub-frame. Front sub-frame removal is needed for transmission removal.
NOTE: The adapter is only intended to support the sub-frame, not the sub-frame and engine or transmission. Before you lower the sub-frame with the
adapter, make sure the engine and transmission are properly supported.
ORDERING INFORMATION
The Odyssey Front Sub-Frame Removal Adapter, T/N EQS07AODSY0, has been shipped to each dealership as a required special tool. To order
additional adapters, call the Honda Tool and Equipment Program.
USING THE ADAPTER
NOTE: The adapter is designed to be used with the transmission jack (model number LSL-W93714) or the powertrain lift (model number OTC-1585),
both
available through the Honda Tool and Equipment Program. The adapter will also work with most commercially available transmission jacks.
1. Loosen the four bolts holding the adapter's adjustable arms to its center plate.
2. Line up the slots in the arms with the bolt holes on the corners of the jack base, then attach the adapter to the jack base with the bolts that came with