Odyssey EX V6-3.5L (1999)
19. Install the shift cable end (A) to the mounting stud (B), by aligning its flat surfaces with the square shape (C) at the bottom of the stud.
20. Install and tighten the nut to the specified torque.
21. Remove the 6.0 mm (0.24 inch) pin that was installed to hold the shift lever.
22. Move the shift lever to each gear and verify that the A/T gear position indicator follows the A/T gear position switch.
23. Start the engine, and check the shift lever operation in all gears.
